히트트레이싱

제품 (Products)

제품의 종류 - 병렬식/직렬식/PIT/SECT/Accessories

  • 병렬식 (Parallel Circuit Type)
    • · 정온전선(Self-Regulating Heating Cable)
    • · 정출력 존히터(Constant Wattage Heating Cable)
    • · 가변출력 존히터(Power Limiting Heating Cable)
  • 직렬식 (Series Circuit Type)
    • · MI(Mineral Insulated) Heating Cable
    • · Series (STH) Heating Cable
    • · Long Line Series (LSTH) Heating Cable
    • · Snow Melting / Floor Warming (SMFW) Heating Cable
    • · PIT (Pre-Insulated Tubing) Bundle
    • · SECT (Skin Effect Current) Heat Trace System
  • Accessories
    • · Power Connection kit
         (UPC, UMC, USL, HPC, APC, EPC, EPCL)
    • · Tee & Splice Kit (STK, UMC)
    • · End Termination Kit (RTES, RES, UES, SLK, HSL)
    • · Thermostat Controller (E121, UBC, TXR, HTS, DTS)
    • · TH-Sensor (WPT, PTS, TR10)
    • · Fixing tape (FT-3, AT-1)

정온전선 (Self-regulating heating Cable)

  • 수지에 Carbon이 배합된 반도전성 Polymer에 가교공정 (Cross Linking)을 가한 발열체가 두가닥의 도체 (Buss Wire) 사이에서 병렬전기회로를 구성하고 있어 외부온도가 낮을시에는 전류량이 증가하여 발열량이 높아지고, 반면에 외부의 온도가 높아지면 부분적으로 Carbon 결합을 끊음으로 전류의 흐름이 적어져 발열량이 줄어드는 특성이 있습니다. 온도가 상승하면 저항이 증가하는 정방향 온도저항 특성 PTC(Positive Temperature Co-efficient)을 최대한 응용한 히터입니다.

  • 110VAC(110~120V)및 220VAC(208~277V)용이 있으며 발열량에 따라 Feet당 3, 5, 8, 10, 15, 20Watts (Meter당 10, 16, 26, 33, 49, 66Watts)의 모델이 있습니다. 기준온도 10℃(50℉) 기준의 출력입니다.

  • 내열온도(Max, exposure temp)에 따라 저온(85℃), 중온(135℃), 고온(215℃)급으로 구분됩니다.

정출력 존히터(Constant Wattage heating cable)

  • 절연된 두 가닥의 도체(Buss Wire)가 약 1m 간격으로 번갈아서 피복이 제거된 상태에서 니크롬 발열체를 감아놓은 방식으로 1m를 존(Zone)으로 한 발열회로가 병렬로 연결되는 구조입니다.

  • 정온전선(Self-regulating heating cable)에 비하여 주변 온도변화에 상관없이 비교적 일정한 출력을 발생하는 특성이 있습니다.

  • 120, 240, 480VAC 용이 있으며 발열량에 따라 Feet당 4, 8, 12 watts(meter당 13, 26, 39 watts)의 모델이 있습니다.

가변출력 존히터(Power Limiting heating cable)

  • 정출력 존히터와 비슷한 구조이나 1m 간격으로 절연피복이 제거된 두가닥의 도체 위에 니크롬 발열체를 그대로 감는 것이 아니라 유리사(glass yarn) 위에 니크롬 발열체를 감은 형태를 다시 도체 위에 감아서 1m를 존(Zone)으로 한 병렬회로가 구성되는 구조입니다.

  • 정출력 존히터의 장점을 살리면서 단점을 보강한 제품으로서 유리사가 발열체를 지지해 주는 구조로 현장에서 구부림 등으로 인한 회로 파손의 우려가 줄어들며, 회로당 발열체의 적용 길이가 길어지는 효과로 온도가 상승할 때 저항이 증가하여 출력이 감소하는 PTC(Positive Temperature Co-efficient)특성을 갖습니다.

  • 110VAC(110~120V), 220VAC(208~277V) 및 480VAC 등이 있으며 발열량에 따라 Feet당 5, 10, 15, 20watts(Meter당 16, 33, 49, 66 watts)의 모델이 있습니다. 최대 내열온도는 260℃입니다.

MI (Mineral Insulated) heating cable

  • 한 가닥 또는 두 가닥의 발열체에 2600℃의 내열특성을 갖는 무기물질 (Magnesium Oxide Powder)로 절연되고 금속재질로 피복된 구조의 제품입니다.

  • 피복재질에 따라 Inconel, Alloy825, Stainless Steel 316, Coupro nickel, Copper Sheath 등으로 구분되며 최대사용전압에 따라 300V, 600V, 750Volts rating으로 구분됩니다.

  • 최근에는 외부피복이 용접(Welding)방식이 아닌 인발(Drawing)방식으로 제조되므로 이음매가 없는 seamless형태로서 모든 히팅케이블 제품 중에서 가장 내구성이 뛰어나며 높은 내열성(800℃)을 갖습니다.

  • 여러가지 우수한 특성이 있으나 직렬식 히터방식의 성격상 사용길이 등을 고려한 모델 선정 등의 섬세한 설계가 필요하며 비열부와의 연결 용접 과정은 전문회사의 특별한 기술이 요구됩니다.

    한국EHT는 1989년에 국내 최초로 MI(mineral insulated) 히팅케이블 적용을 도입한 회사입니다.

Series (STH) heating cable

  • 다양한 저항값의 발열체에 불소수지(Fluoropolymer)로 절연이 되어있는 구조입니다.

  • 발열체/불소수지 피복/주석도금동선편조(tinned-copper braiding)/불소수지 외부피복의 구조이며 다양한 저항값(0.0117~1500ohm/m)으로 회로길이에 따라 적용이 가능하며 가장 유연성(Flexibility)이 우수한 제품입니다.

  • 절연피복재질로 사용되는 불소수지는 PFA, PTFE 재질로서 최대 260℃의 내열특성을 갖습니다.

Long Line Series(LSTH) heating cable

  • 발열도체를 저항값이 낮은 재질(Nickel-Plated Copper)로 적용함으로서 한 전원에서 공급하는 회로 길이를 km단위의 Long Line 설계가 가능한 제품입니다.

  • 발열체/1차 불소수지 피복/2차 불소수지 피복/ 주석도금동선편조(tinned copper braiding)/불소수지 외부피복의 3중 절연 구조를 갖고 있습니다.

  • 절연피복재질로 사용되는 불소수지 종류에 따라 최대 200℃(FEP)및 최대 260℃(PFA)의 내열 특성을 갖습니다.

Snow Melting & Floor Warming (SMFW) heating cable

  • 피복 재질 및 구조에 따라 콘크리트 및 아스팔트 포장형으로 구분됩니다.

  • 바닥 타일 마감용 및 동절기 콘크리트 양생용 등 용도에 따라 다양한 형태로 공급되고 있습니다.

  • 도체 저항에 따라 다양한 면적에 사용되며 현장에서의 편리한 시공을 위하여 매트(Mat) type으로도 공급됩니다.

PIT(Pre-Insulated tubing)bundle

  • 한 가닥 또는 여러 가닥의 tube와 히팅케이블 및 보온재가 PCV재질로 피복되어 있는 배관/히팅/보온 일체형 제품입니다.

  • 용도에 따라 tube의 재질 및 가닥수, 히팅 케이블 및 보온재의 재질 및 두께가 설계되어 주문 제작됩니다.

SECT (Skin effect current)heat trace system

  • 전류의 표피효과(Skin effect)를 이용하여 Long Line 설계시 유용한 시스템입니다.

  • 도체(Skin cable)의 단면적(SQ mm)과 인가 전압을 산출하여 적절한 출력이 발생하도록 설계되며 기존 SECT system의 단점을 보완하여 Korea EHT에서는 ‘MI cable을 활용한 Sect System’ 에 대한 특허를 보유하고 있습니다.

Accessories

Power Connection Kit
  • UPC

    Power Connection Box

    • NEMA 4X
    • Entry for 1 Cable
    • 3/4” Conduit Hub Opening
    • Lighted or Non-Lighted
    • Use With : SRL, SRP, SRM/E, CWM, SRF, HWM
    • Third-party certifications :
      UL Listed, CSA, FM, ATEX
    • BIM Information
  • UMC

    Multiple Entry Power Connection Box

    • NEMA 4X
    • Entry for up to 3 Cables
    • Power, Splice, or Tee Connection
    • 3/4” Conduit Hub Opening
    • Use With: SRL, SRP, SRM/E, CWM, SRF, HWM
    • Third-party certifications: UL Listed, CSA, FM, ATEX
    • BIM Information
  • USL

    Power/End Seal Signal Light Kit

    • Use With: SRL, SRP, SRM/E, CWM, SRF, HWM
  • TI-KRT-HPC

    Explosion Proof Power Connection Kit

    • Copper Free Aluminum
    • Cable Entry Up to 3 Cables
    • PF 3/4" 3-Way, 1" 1-Way Hub Opening
    • With 30A, 3P Terminal Block
    • Protection Class : IP67
  • APC

    Power Connection Kit

    • Copper Free Aluminum
    • Cable Entry Up to 2 Cables
    • PF 3/4" 3-Way, Hub Opening
    • With 30A, 3P Terminal Block
    • Protection Class : IP67
  • EPC

    Power Connection Kit

    • Copper Free Aluminum
    • Cable Entry Up to 4 Cables
    • PF 3/4" 5-Way, Hub Opening
    • With 30A, 3P Terminal Block
    • Protection Class : IP67
  • EPCL

    Power Connection Lamp Kit

    • Copper Free Aluminum
    • Cable Entry Up to 4 Cables
    • PF 3/4" 3-Way, 1"-Way, Hub Opening
    • With 30A, 3P Terminal Block, LED Light
    • Protection Class : IP66
  • UPC

    Power Connection Box

    • NEMA 4X
    • Entry for 1 Cable
    • 3/4” Conduit Hub Opening
    • Lighted or Non-Lighted
    • Use With : SRL, SRP, SRM/E, CWM, SRF, HWM
    • Third-party certifications :
      UL Listed, CSA, FM, ATEX
    • BIM Information
  • UMC

    Multiple Entry Power Connection Box

    • NEMA 4X
    • Entry for up to 3 Cables
    • Power, Splice, or Tee Connection
    • 3/4” Conduit Hub Opening
    • Use With: SRL, SRP, SRM/E, CWM, SRF, HWM
    • Third-party certifications: UL Listed, CSA, FM, ATEX
    • BIM Information
  • USL

    Power/End Seal Signal Light Kit

    • Use With: SRL, SRP, SRM/E, CWM, SRF, HWM
  • TI-KRT-HPC

    Explosion Proof Power Connection Kit

    • Copper Free Aluminum
    • Cable Entry Up to 3 Cables
    • PF 3/4" 3-Way, 1" 1-Way Hub Opening
    • With 30A, 3P Terminal Block
    • Protection Class : IP67
  • APC

    Power Connection Kit

    • Copper Free Aluminum
    • Cable Entry Up to 2 Cables
    • PF 3/4" 3-Way, Hub Opening
    • With 30A, 3P Terminal Block
    • Protection Class : IP67
  • EPC

    Power Connection Kit

    • Copper Free Aluminum
    • Cable Entry Up to 4 Cables
    • PF 3/4" 5-Way, Hub Opening
    • With 30A, 3P Terminal Block
    • Protection Class : IP67
  • EPCL

    Power Connection Lamp Kit

    • Copper Free Aluminum
    • Cable Entry Up to 4 Cables
    • PF 3/4" 3-Way, 1"-Way, Hub Opening
    • With 30A, 3P Terminal Block, LED Light
    • Protection Class : IP66
Tee & Splice Kit
  • STK

    Tee & Splice Kit

    • GRP (Glass-Fiber Reinforced Polyester)
    • Cable Entry Up to 3 Cables
    • With 30a, 3P Terminal Block
  • UMC

    Tee & Splice Kit

    • GRP (Glass-Fiber Reinforced Polyester)
    • Cable Entry Up to 2 Cables
    • With 30a, 5 P Terminal Block
    • Protection Class : IP66 / Nema 4X
    • Class : Ex e IIC
  • STK

    Tee & Splice Kit

    • GRP (Glass-Fiber Reinforced Polyester)
    • Cable Entry Up to 3 Cables
    • With 30a, 3P Terminal Block
  • UMC

    Tee & Splice Kit

    • GRP (Glass-Fiber Reinforced Polyester)
    • Cable Entry Up to 2 Cables
    • With 30a, 5 P Terminal Block
    • Protection Class : IP66 / Nema 4X
    • Class : Ex e IIC
End Termination Kit
  • RTES

    Explosion-Proof
    End Seal Kit

    • GRP (Glass-Fiber Reinforced Polyester)
    • Class : Ex e II
  • RES

    End Seal Kit

    • 57 X 16mm Diameter
    • Heat Silicone Caps
  • UES

    Explosion-Proof
    End Seal Kit

    • GRP (Glass-Fiber Reinforced Polyester)
    • Class : Ex e II
  • SLK

    Signal Light Termination Kit

    • GRP(Glass-Fiber Reinforced Polyester)
    • Polycarbonate Cover
    • 3 (Three) LED Lamp
    • Protection Class : IP66
  • TI-KRT-HSL

    Explosion Proof
    End Signal Lamp Kit

    • Material : COPPER FREE ALUMINUM CASTING
    • Entry Size : 22C * 1 Hole
    • ※ Contact Manufacturer to Use Max. Voltage & Ampere.
  • RTES

    Explosion-Proof
    End Seal Kit

    • GRP (Glass-Fiber Reinforced Polyester)
    • Class : Ex e II
  • RES

    End Seal Kit

    • 57 X 16mm Diameter
    • Heat Silicone Caps
  • UES

    Explosion-Proof
    End Seal Kit

    • GRP (Glass-Fiber Reinforced Polyester)
    • Class : Ex e II
  • SLK

    Signal Light Termination Kit

    • GRP(Glass-Fiber Reinforced Polyester)
    • Polycarbonate Cover
    • 3 (Three) LED Lamp
    • Protection Class : IP66
  • TI-KRT-HSL

    Explosion Proof
    End Signal Lamp Kit

    • Material : COPPER FREE ALUMINUM CASTING
    • Entry Size : 22C * 1 Hole
    • ※ Contact Manufacturer to Use Max. Voltage & Ampere.
Thermostat Controller
  • E121

    Explosion-Proof
    Thermostat Controller

    • Copper Free Aluminum
    • Difference ±3.3°C
    • Rating : SPDT 22AMP / 480VAC
    • Range : -5°C to 163°C
    • Class : IP66 / Exd IIC T6
  • UBC

    Line-Sensing Thermostat

    • Use With SRL, SRP, SRM/E, CWM, SRF, HWM
  • TXR

    Heat Trace / Freeze Protection
    Thermostats - TXR

    • Remote Mount for Heat Trace (Bulb & Capillary)
    • 22 Amp Resistive Switch
    • Single and Dual Output Models
    • ± 1% Setpoint Repeatability
    • Fast Response for Protection of Valves and Piping
    • NEMA 4X, 7 and 9 Enclosures
    • Third-party certifications:
      UL Listed, CSA, ATEX, FM
  • TI-KRT-HTS

    Explosion Proof Line
    Sensing Thermostats

    • Material : COPPER FREE ALUMINUM CASTING
    • Entry Size : 22C * 2 Hole
    • Temperature Range
    • ※ Contact Manufacturer to Use Max. Voltage & Ampere.
  • DTS

    Heat Trace
    Digital Thermostat

    • 30 Amp Solid State Relay (SSR)
    • Output
    • 120 to 277 Vac Operation
    • C1D2 Hazardous Area Approval
    • ATEX/IECEx Zone II
  • E121

    Explosion-Proof
    Thermostat Controller

    • Copper Free Aluminum
    • Difference ±3.3°C
    • Rating : SPDT 22AMP / 480VAC
    • Range : -5°C to 163°C
    • Class : IP66 / Exd IIC T6
  • UBC

    Line-Sensing Thermostat

    • Use With SRL, SRP, SRM/E, CWM, SRF, HWM
  • TXR

    Heat Trace / Freeze Protection
    Thermostats - TXR

    • Remote Mount for Heat Trace (Bulb & Capillary)
    • 22 Amp Resistive Switch
    • Single and Dual Output Models
    • ± 1% Setpoint Repeatability
    • Fast Response for Protection of Valves and Piping
    • NEMA 4X, 7 and 9 Enclosures
    • Third-party certifications:
      UL Listed, CSA, ATEX, FM
  • TI-KRT-HTS

    Explosion Proof Line
    Sensing Thermostats

    • Material : COPPER FREE ALUMINUM CASTING
    • Entry Size : 22C * 2 Hole
    • Temperature Range
    • ※ Contact Manufacturer to Use Max. Voltage & Ampere.
  • DTS

    Heat Trace
    Digital Thermostat

    • 30 Amp Solid State Relay (SSR)
    • Output
    • 120 to 277 Vac Operation
    • C1D2 Hazardous Area Approval
    • ATEX/IECEx Zone II
TH-Sensor
  • WPT

    PT100 Head Type Sensor

    • Copper Free Aluminum / Stainless Steel Sheath
    • 1/2" PF Theaded
    • PT100 ohm RTD
    • ±0.12% Accuracy
    • 3Wire Connection
    • Protection Class : IP65
  • PTS

    PT100 Sensor

    • Capillary Tube : Stainless Steel Ø6.0mm X 100mm
    • PT100 ohm RTD
    • ±0.12% Accuracy
    • 3Wire Connection
    • Protection Class : IP55
  • TR10

    Explosion-Proof
    PT100 Head Type Sensor

    • Copper Free Aluminum / Stainless
    • Steel Sheath
    • 1/2" PF Theaded
    • PT100 ohm RTD
    • ±0.12% Accuracy
    • 3Wire / 6Wire Connection
    • Protection Class : IP65
      / Ex d IIC T6
  • WPT

    PT100 Head Type Sensor

    • Copper Free Aluminum / Stainless Steel Sheath
    • 1/2" PF Theaded
    • PT100 ohm RTD
    • ±0.12% Accuracy
    • 3Wire Connection
    • Protection Class : IP65
  • PTS

    PT100 Sensor

    • Capillary Tube : Stainless Steel Ø6.0mm X 100mm
    • PT100 ohm RTD
    • ±0.12% Accuracy
    • 3Wire Connection
    • Protection Class : IP55
  • TR10

    Explosion-Proof
    PT100 Head Type Sensor

    • Copper Free Aluminum / Stainless
    • Steel Sheath
    • 1/2" PF Theaded
    • PT100 ohm RTD
    • ±0.12% Accuracy
    • 3Wire / 6Wire Connection
    • Protection Class : IP65
      / Ex d IIC T6
Fixing tape
  • FT-3

    Fiberglass Tape Cable Attachments

    • 30m roll glass cloth tape with pressure-sensitive thermosetting silicone adhesive 12mm wide. 310°F(155°C)rating. Strap at one foot intervals at minimum application temperatures of 40°F (5°C).
  • AT-1

    Aluminum Tpae Cable Attachments

    • 30m roll aluminum foil installation tape with pressure-sensitive acrylic adhesive.
      50mm wide. 200°F (93°C)rating. Minimum application temperatures of 40°F (5°C).
  • FT-3

    Fiberglass Tape Cable Attachments

    • 30m roll glass cloth tape with pressure-sensitive thermosetting silicone adhesive 12mm wide. 310°F(155°C)rating. Strap at one foot intervals at minimum application temperatures of 40°F (5°C).
  • AT-1

    Aluminum Tpae Cable Attachments

    • 30m roll aluminum foil installation tape with pressure-sensitive acrylic adhesive.
      50mm wide. 200°F (93°C)rating. Minimum application temperatures of 40°F (5°C).